New Yamaha retrofit silent unit and grade up unit.

RIP That leads to another question (sorry) which you might have an answer for: the Japanese specs for the RSC3 say "no" on the MIDI line. I assume that means "no" for the DIN-MIDI plug, and I was expecting to see a line saying MIDI-over-USB with a "yes" but there isn't such a line (even though there is USB-to-host and USB-to-device and the former might mean what I mean by MIDI-over-USB). Do you know that for sure?

I had exactly the exact same interrogation :-)

So I asked very specifically to Queue99 if it was possible to connect the RSC3 to an iPad through the USB-to-host plug (located on the rear panel I think) to send MIDI data via wired connection and not bluetooth MIDI and his answer was "yes" without any ambiguity. The VSH3 has this same ability but, in addition, includes also the legacy 5-pin DIN IN/OUT connectors (which I would not use anyway in my specific case).

RIP Yamaha does not directly collaborate with Modartt, but does have a so-called "dialect" of MIDI with proprietary extensions. I am not sure about what is the license for using those extensions, but PianoTeq does use them (I believe they call them something like "MIDI Disklavier XT version"). So what you say is possible, and anybody with the instrument can easily verify what is happening by inspecting the MIDI packages (if anybody wants I'm willing to help).

Okay, thank you for this precious info.

I should have tried, during my visit to the store, to connect my iPhone via bluetooth to the SC3 to monitor incoming MIDI events. Too bad…

So for now, what would be interesting to know is :

1. what MIDI messages are sent by the SC3 unit ?
2. does Modartt has any plan to exploit these additional non standard infos to improve their engine just for the happy few owners of Yamaha "Grand Expression Modeling" compatible hardware ? I have a strange feeling that my question is… self-answering :-/

Paulo164 Worth noting that the SC3 is supporting the “grand expression modeling” feature.

Paulo164 I should have tried, during my visit to the store, to connect my iPhone via bluetooth to the SC3 to monitor incoming MIDI events. Too bad…

Paulo164 what MIDI messages are sent by the SC3 unit ?

According to the manual, available at https://jp.yamaha.com/files/download/other_assets/4/1618034/ta3_tc3_sh3_sc3_en_om_c0.pdf at page 53

On an actual acoustic piano, subtle changes in the sound can be produced by changing your
playing touch from when you press a key to when you release it. For example, when you press
a key all the way to its bottom, the key hits the keybed underneath and the noise reaches the
strings, changing the sound slightly. Furthermore, the tone when the damper is lowered onto
strings to mute the sound is changed by how quickly you release the key. Grand Expression
Modeling technology recreates these subtle changes in the sound that respond to your touch.
This allows you to add accents by playing strongly or add resonance by playing softly to
produce superbly expressive sound. A crisp tone can be heard when playing staccato as well
as a lingering sound produced when releasing the keys slowly.

and then page 64

When transmitting MIDI data from this instrument to an external MIDI device, unexpected sounds may occur because of data related to the Grand Expression Modeling function

I am convinced that it does send these "internal" information as MIDI. Now for how VST companies could use those, your guess is as good as mine.

EDIT: the MIDI pdf file at https://jp.yamaha.com/files/download/other_assets/5/1784935/ta3_tc3_sh3_sc3_en_mr_b0.pdf has lots of information (probably too much 🤣 ) and it's not clear to me if this Grand Expression is included (there is a CC called "Expression" which could be it, and a quick Google search hits mostly Steinberg stuff talking about "note expression")

RIP

Ah, nice find !

To my modest knowledge, Yamaha is the only keyboard manufacturer that would enrich standard midi data with this kind of subtleties.

So it would be worth for Modartt (or any other VST company, although I think only a modeling approach could benefit from this) to implement this subtle changes in sound in their own way.

Queue99 I am interested in obtaining a Yamaha silent system. Thank you James

RIP

I have found some very interesting information regarding Grand Expression Modeling, which may be also very good news for us, enthusiasts :

• SC3 transmit “key acceleration” in CC#19 coded on 7 bits
• SC3 also transmit “expand velocity” (hi-res velocity) on CC#88 coded on 7 bits (so a total of 14 bits for velocity)

This is mentioned in the MIDI reference spec sheet of the Silent SC3/SH3 & Transcoustic TA3/TC3 models :

https://fr.yamaha.com/files/download/other_assets/5/1784935/ta3_tc3_sh3_sc3_en_mr_b0.pdf

So there are strong evidences that SC3/SH3 are sending midi events containing the 2 components of Grand Expression Modeling, namely “key acceleration” and “expand velocity”.

Some precisions of a CLP785 user on Modartt’s forum (CLP785 sharing the same specs as SC3) :

https://forum.modartt.com//viewtopic.php?id=5897&p=2

Yamaha CLP785 records them (extended velocity with controller 88 and touch acceleration with controller 19) and transmits them through midi (I receive them on Cubase, and I can read them too in the midi files I recorded with only the CLP).

Only 7 bits per controller is used (128 values possible), so we have 14bits velocity and 7 bits acceleration, which is 21 bits of resolution per key touch (2097152 values, or more than 2 millions).

With hours of recording, I checked, all 14 bits of velocity are used, and all 7 bits of acceleration are used.

The acceletation seems to have more frequently the lowest, middle and highest values, which I believe are the most negative value, 0 and the most positive value.

I can tell the difference, and the nuances are really really great to hear.

One question from a non-engineer guy… If the distance from the key to the sensor is roughly 1cm when at rest, and the distance from the same sensor to the neighboring key at bottom is roughly the same 1cm, how can this system prevent crosstalk between keys? Is the induction strictly axial (ie, vertical detection more sensitive than lateral?). Do they only measure speed and acceleration in the last couple of millimeters before bottom? If so, is this suitable for playing "above escapement"?

vagfilm

Very good question I asked to myself also (you are not so “non engineer” as you may claim).

Well, I am purely speculating here but I would say :

• yes, the induction is probably (much) more axial than lateral, to reuse your own words
• when I played in the piano store, I remember I tried specifically to play staccato without reaching the bottom of the key (I would say half way) and the sound was coming out nicely with the same hit and miss behavior that I could get with the acoustic counterpart (you know, when the hammer is just on the edge of hitting the string)

Now you are about to think : okay, easy with playing just 1 key. But what if there was an interaction between 2 adjacent keys ? Induction of key#1 should interact with induction of key#2 and vice versa ?

So : I tried to play trills of 2 adjacent notes, deeply and shallowly, and did not notice any kind of crosstalk that could alter the consistency and precision of velocity measurement. That’s how it is. Well done Yamaha.

I asked this because in the past I also thought about using hall sensors instead of optical sensors, and after a 10 minute breadboard/arduino experiment, I felt it would be a nightmare to calibrate and ensure key specificity. Maybe it ia doable, afterall…

Very interesting topics. I want to install a new silent system on my piano, I will look at Yamaha because ad-silent and co. have not convinced me.

yoz

After now months of usage, I can only recommend this retrofit installation. Very satisfied.

See my dedicated (and paused) thread about the installation and proper regulation for optimal performances :

https://pianoclack.com/forum/d/1546-yamaha-rsc3-retrofit-silent-system/24

Queue99

Hi there, I have an 1994 M100 (seems to be pretty much like an U1 produced for the European market with an optical Silent System). Have moved this to the US now, but the Silent System has been acting up (some keys not playing others very loud), and several US technician (Yamaha experts) told me a few years ago <2018) that this is an electric board issue. Now with the new VSH3 option, I am wondering if I can upgrade my system with VSH3 rather than trying to 'repair' the optical one (as I have no idea how - apparently the electrical board is no longer produced).
Do you know if the VSH3 would work with the M100 (M100 is not on the official list of compatible devices - maybe because it is an European and not a Japanese Model)
If you think that VSH3 is compatible, I would be very interested to purchase one.
Thanks in advance for your help

Paulo164 Thank you for this review, very helpful! Just wondering if you've compared the SC2 to SC3? I ask because I'm thinking about purchasing a gently-used C3X TA2 grand piano, and just wondering how the silent sensor mechanisms SC3 - magnetic sensors vs SC2 - optical and gray-scale shutter, compare? Also, does anyone know if TA2 can be upgraded to TA3? I figure they share same controller box (SHx and TAx)…

Thanks,

Scott

skywalker

The M100 is the same as the Japanese version of the U100SX, so the VSC3 can be installed.

I believe the M100 is a first generation silent, so the key sensor board is corroded.

I've been experiencing this symptom a lot lately.（U5AS、U30AS、U300S、U100SX,U300SX,etc)

Parts were no longer in supply.

I guess vintage synthesizer repairman may be able to fix it.

I guess RSH3 is better than VSC3, the reason is that the old silent mechanism is also replaced and the touch when silent is better.

swolk99

Hi,

On the paper, the SC3 has this over the SC2:

• "Articulation Sensor system" to detect force/acceleration in addition to velocity for staccato/legato playing (CC19)
• Binaural samples for Bösendorfer Imperial
• MIDI bluetooth
• Added arranger to be accompanied by bassist and drummer
• -30% of current consumption (12W -> 8W)

Also, looking at the MIDI specs sheet, it seems that:

• the SC2 doesn't handle CC#88 (so no high-res velocity)
• does handle Poly-Aftertouch (for smooth release), like the SC3

On the field, I can't tell you which one performs the best but I would go with the SC3 anyway, should it be for maintenance easiness alone.

Paulo164 Thank you very helpful! Just wish the Yamaha's were less expensive in the US. The dealer markup is unbelievable. 🙁

Queue99

Thanks a lot for the details! Super helpful. I inquired with Yamaha in Germany and was told the MP100 Silent should be compatible with the VSH3-10. I am a bit confused that you say RSH3 is better than VSC3? Do you mean RSC3 being better than VSH3? Is the VSH3/VSC3 not replacing the silent mechanism?

I assumed the VSH3 would be the same as the RSC3, but without the silent rail?

Queue99

Can you elaborate on the 'key sensor board' being corroded? How could a synth repairman fix it? I might try to find someone like this here in San Francisco, but am wondering if the sound / reliability in the new VSH3 is not so much better than the old system, that the upgrade is worth anyway?

skywalker

It was a typo. It’s RSC3 or VSH3 only.

And yes, RSC3 = VSH3 + hammer stop bar - some features on the control unit.

Otherwise, same quality.

skywalker

Yes, the upgrade is worth anyway.