SFZ

I'm reconsidering what I wrote. Last night I listened to the audio file that @vagfilm made, and I think he had his MIDI renderer at a slower BPM, so the audio file he provided is X times longer than mine. Thus the curve looks more flat. I still believe that VSL makes their source recordings as true to the instrument as possible, and with a robot, it should be dialed in. I guess that means that the particular Hamburg D274 was voiced particularly brightly.

My math/graphing brain is fuzzy - the MIDI file was time stretched, but the max attack amplitudes should be the same, and then I scaled the graph back to the same size to compare with the others. Should it still be parabolic? I'm flip flopping.

dore_m I think he had his MIDI renderer at a slower BPM

That is probably true because I happened to paste the midi file into an existing 40 bpm track (or maybe even 20bpm...). I was aware of that, but as far as I understand, it will not affect the output: lower bpm only increases the inter-note interval, not the spectral or peak amplitudes of the rendering. So, the only difference is that each note lasts longer. There should be no difference in the linearity of peaks progression.

Its great how I confuse myself. I agree.

@Jose EB5AGV , if you have time, can you render the VSL Fazioli and post a wave or MP3 file for me to analyze? Midi file is up in this thread:

#72116

Way back when, you mentioned that my Fazioli wasn't so great in the lower velocity range, and after re-visiting the Kontakt 'coding', I see I left a special EQ for you to darken the lower velocity range (it's bypassed by default). Now I'm wondering if VSL's lower range is just as bright.

dore_m

This whole discussion is way over my head, but here is your MIDI file rendered with the VSL Fazioli - hope it's helpful:

vsl-fazioli-test.mp3

Thanks for the mp3 jdg78

VSL Fazioli:

I'm wondering if the mp3 compression is causing a different spectral profile. There's much more black, indicating either they totally cut out noise (like I do sometimes) or the high frequency noise was taken out by the compression.

dore_m I'm wondering if the mp3 compression is causing a different spectral profile.

Well, here it is as a wav file:

vsl-fazioli-test-2.wav

Much better.... I'm seeing that the low velocity is darker than mine, and highest velocity is almost as bright as mine. I'm not sure I mentioned it, but I did not record a ppp layer, I started at about p, so I wasn't sure how dark the sound gets. I'll try myself if I get to the same piano again.

jdg78 One last question - which microphone setup did you use, and where there any EQ's applied? A screenshot of the mixer screen would help, if possible. (Thanks again)

VSL Fazioli wav file:

The first (leftmost) 8 notes of the VSL Fazioli (midi 4 to 30s) show a distinct step-like increase in amplitude (blue trace), that is absent in the VSL D-274. In the D-274 any midi value below 20 sounds the same.
On the other hand, the Fazioli ff range is all over the place and looks like a rollercoaster. VSL guys are so technically skilled that this is probably a piano characteristic rather than a sampling mistake.

Supposed it's much easier to see a change in timbre than to hear it: Its generally all very smooth.
The different timing in midi-file causes the more pronounced fade-to-black at some levels. This pretends a change not really there.

At first i was puzzled by the irregular spikes in forte. I guess it's an phase effect of the sampling. The energy increases but as there is a very pure fundamental the center of the amplitude depends on timing of samples.
@dore_m , did you see similar effects with other pianos?

-Rhodes74

Excellent thread, very nice discussion. I have very small things to add.

dore_m I'm wondering if the mp3 compression is causing a different spectral profile.

Of course it does. The whole point of the MP3 compression is using the "masking" psycoacoustic properties that some frequencies become inaudible when there are other nearby frequencies loud enough. Without doing any math, I think that in these graphs an MP3 file will look like much lower resolution in the vertical axis of the golden plots, and probably more black everywhere that was already dark.

n-player dore_m I have always thought that the VSL Steinway was especially bright, and you've told me before that a KB's velocity curve needs to be adjusted when using the D274. I can see what you mean, I think. The blue waveform increases more linearly than the others (especially from the midway point to the right). The other libraries are more parabolic. I think normally it should increase parabolically (inverse square law?). I think the graphs show that the loudness and brightnesses increase differently than the other ones.

That is an interesting graph and observations. Why would this be different from those of other VIs?

I speculate that's the European vs American style of pianos that the guy from Living Pianos always talk about? I his most explicit video about this topic he says that on one style (the one with the linear curve in this context) the player has to "work hard" to reach higher volumes. On the other hand, that's much easier on the other style (the one with the exponential curve in this context) it's easy to get these higher volumes, but it becomes obviously harder to get to the intermediate volumes, causing a good player to change the "interpretation" rather than fighting the instrument to get a predetermined one.

dore_m One last question - which microphone setup did you use, and where there any EQ's applied? A screenshot of the mixer screen would help, if possible. (Thanks again)

I used a custom mic mix as shown below:

Re: EQ, I hadn't actually noticed this before, but it appears that by default VSL has applied some EQ to the upper frequencies on most of the close and mid mics. Here's what the EQ chart looks like:

Rhodes74 The energy increases but as there is a very pure fundamental the center of the amplitude depends on timing of samples.
@dore_m , did you see similar effects with other pianos?

Funny thing is that because I don't record many layers, and because I mostly close mic everything, I haven't noticed this. I'll conjecture that these mics are the far away mics (?), that maybe affected by phase more? I noticed that in the piano placement diagram that they strangely placed the piano in the center of the stage, with the player facing the audience/far away mics. In doing so, the lid is reflecting sound to the side. Could this cause the irregular forte waveforms?

jdg78 I used a custom mic mix as shown below:

That explains why the "brightness" on the right side of the graphs isn't as prominent as the other piano plots - the upper frequencies are muted with EQ. Interesting that the condenser (close) is the largest contributor, as condensers are the type of mic that introduce the least color.

It also somewhat shoots down my theory about the piano placement and discontinuous waveforms at ff.

I haven't used the VSL GUI much, just a 30 day demo, but the Mid1 mic I think has it's pan changed by 180 degrees (red color). Maybe that caused the discontinuous waveform (?)

vagfilm The first (leftmost) 8 notes of the VSL Fazioli (midi 4 to 30s) show a distinct step-like increase in amplitude (blue trace),

I can definitely hear the difference between the 8th and 9th note. You can see a yellow line abruptly appear in the 9th note, seen just below the blue waveform. And the relative amplitude jumps around a bit in this range.

Rather than ask for another wave file without EQ, I just recreated the EQ exactly like the screenshot, applied it to my Fazioli instrument and inspected the waveform. I'm not posting the screenshot, but it's now apparent to me that I should have recorded a lower velocity, so I should use the (disabled) EQ curve simulating the darker ppp samples. It's not true to my recordings, but more true to the instrument. My question is basically answered.

Apologies for a dumb question - is it possible to adjust velocity when using The Experience Fazioli on sfz? I can’t see a control for this.

Thanks and thanks for great instruments.

GPG Apologies for a dumb question - is it possible to adjust velocity when using The Experience Fazioli on sfz? I can’t see a control for this.

Unfortunately there aren't any onscreen controls with SFZ. I wish there were, or Plogue would release their SDK extensions for my use. However, there is a way - but it's a bit manual. You have to edit with a text editor.

As you probably know, velocities range from 0-127. Each block of samples (I think called a group) is placed within a velocity range with the following lines:

lovel=1 hivel=39 amp_velcurve_1=.48 amp_velcurve_39=.87

lovel is the low velocity of the range, hivel is the high velocity of the range. if you change, for example, hivel=51, then those sounds will play within the velocity range 1-51. You should also change amp_velcurve_39=.87 to amp_velcurve_51=.87. This is the EQ that opens up in the velocity range.

Hope that makes sense. You just go through and do a find/replace with a text editor. You literally can say replace "=39" with "=51" and _39 with _51. That would surgically replace the correct numbers.

Also, if you have the Aria player (which comes with Garritan CFX) then you can play Dore's instruments through that, and Aria does enable changing the velocity curve easily.

I only realized that you could play other sfz VI's through it rather recently myself - after years of owning it. 😂

Many thanks, Dore, for the detailed response - and then to QUF for the tip re Aria.

PS - I think the Experience Model B vst is the best yet.

Sorry, new question. How do I access the Aria Player (I have Garritan, but I can't see how to load the The Experience files?

thanks,