Yamaha RSC3 retrofit silent system

skywalker

Hi,

Yes, I you already have the hammer stop rail installed, that’s perfect. Installation is quite easy. You just need to have the place to install the sensors rail on the keybed, between the 2 pin blocks (~60mm). Then height should not be a problem. You will have all sorts of spacers to fine-tune the position of the sensors along z-axis.

Under-key inductive devices do not need to be stapled. Just clean the wood surface of the key and the adhesive tape will do the rest. Doing so, I have not had any issue so far.

And : yes, installation for RSC3 and VSC3 systems is the same and is explained in the provided installation manual. You will also learn how to calibrate the sensor once installed.

Hi you all,

I live in the Netherlands and it is quite annoying to see that Yamaha sells the RSC3 only in a few countries like Japan and Canada.

I am looking for a way how to get a RSC3-10 model to the Netherlands. Can someone give me a connection how to achieve this?

Dirk Appel

I can also ship from Japan.

Please send me a PM and I will provide you with more details.

To those wondering, I can only recommend Queue99’s services and support.

Is there any way to ship the RSC3 retrofit silent to Spain? Are the installing instructions in English?

Queue99 Also possible tot sent a VSH3 to The Netherlands? (I cannot sent you a PM yet, because I've to post 5 replys first).

Paulo164 Thanks for your advice

Dirk And Dirk, I'm interested if you succeeded.

Hi, I am new to the forum, registered out of interest for piano silent systems.

I live in Germany and I am interested in the Yamaha VSH3 retrofit kit. From what I can read here, Mr. Queue99 can ship these Kits from Japan an probably you all got it from him, right?

painano rom what I can read here, Mr. Queue99 can ship these Kits from Japan an probably you all got it from him, right?

@Paulo164 did. Hopefully he's some time to respond to you, but meanwhile do read his posts if you haven't already

Sorry, I haven't logged in for a while so I didn't notice. If you want to know more, please email [email protected]

RIP

Hi,

Yes, I still read (silently) this forum. Here I can just confirm it’s perfectly okay to retrofit a standard modern upright with a Yamaha 3rd gen silent system.

@Queue99 is the best to answer properly, while I can give my honest feedback from a end-user perspective (see my previous post).

JPY is currently very low against EUR, so it’s the perfect time to buy (add ~23% for import taxes).

Cheers

Hey Paulo, how you doing, where do you live ? @Paulo164

It was easy for you to acquire this silent system from Japan ?

AlecGB

Hi,

I live in France. Yes, it was easy with the fast shipping option. Upon arrival on your EU territory, you have to clear the import taxes. Only then, the good is released from the customs office located in the airport and can be delivered to your home. Practically, you allow the local shipping company to pay the taxes for you at the customs, then you pay the same amount to the person delivering to your home.

The total delivery time from end to end is around 3 weeks.

Paulo164

I’m French too 😉 3 weeks is pretty fast ! You mounted the system by yourself ? ( I continue in English so everybody can understand 😉 )

AlecGB yes, except the hammer stop bar, which was already installed. There is no particular difficulty, provided you take your time and pay attention to details (my advice is to first level and space evenly your keyboard).

I see many people here complaining about the feeling of digital keyboards. The advantage of the silent system is that you keep an authentic acoustic piano action. Moreover, you can regulate the action to your likings, which is not possible with a DP. Personally, I love the feeling of my upright.

Paulo164 okay I understand, I already have a silent system (yahama from 2000) in my piano but it’s old now, so I’m considering the upgrade. But the update will be made my piano tech, I won’t do that myself. But let’s keep in touch, when I’ll buy my system, I’ll ask you for advice. It seems quite challenging. My keyboard is leveled I guess only one keys sits lower than all the others and my piano tech comes soon to check that so I hope it’s gonna be fixed. But space I don’t see strange gaps between keys but I’ll take a look

Paulo164 yes, except the hammer stop bar, which was already installed.

Some technicians say that installation of mute rail is the most important and hardest part of the task. It needs to be very precise.

Vlad

Very hard to install, I don’t know. But I reckon it would take me several trials to achieve the desired result, which is coming the closest possible to the string, once engaged, while stopping the hammers.

When you engage the mute rail, it moves from the same course from left to right of the keyboard. So what you don’t want is to have the rail perfectly adjusted on one side of the keyboard but not on the other side. Probably you need to insert some spacers to get close to the strings in an equal manner.